UV-3D 6011

UV-3D 6011 is a single component, UV cured, polyurethane acrylic adhesive specifically designed for the adhesion of photo paper to acrylic panels. The colloid is a transparent liquid with characteristics such as medium to low viscosity, fast curing speed, high adhesive strength, and no yellowing.

Classification:

Uv bonding adhesive

Product Message Contact Us

Product Description

Product Overview	UV-3D 6011 is a one-component, UV-curable, polyamino-acrylic cool adhesive specifically designed for the bonding of photo paper to acrylic sheets. The colloid is transparent liquid, which has the characteristics of medium and low viscosity, fast curing speed, high bonding strength and no yellowing.
Main applications:	It is applied to the bonding of photo paper to acrylic sheets
Pre-cure performance	Test items	Test Method:	Specifications
	appearance	Visual	Colorless and transparent
	Viscosity (cP)	BROOKFIELD DVIl1 5rpm	1500-5500
Curing conditions	3D 6011 cures under sufficient UV exposure, and its speed and depth depend on the light intensity, the spectral distribution of the light source, the irradiation time, and the light transmission of the substrate. The following data were measured under UV radiation of 252 mw/cmi from the LED lamp
	Dry time (s)		1
	Deep curing time (1mm,s)		5
	Full curing energy (1mm, mj/^cm2)		981
Post-cure performance	The following data was measured after full cure under an LED light source
	Hardness (Shore A)		23
	Maximum tensile force (N)		13
	Tensile Strength (MPa)		1.2
	Shear Strength (MPa)	PMMA-PMMA	>3.0
Storage and transportation	Please store in a cool and dark place, please cover the product after opening the lid of the barrel, and do not pour it back into the original packaging barrel before the glue is used. The best storage temperature is between 10°C-30°C.
Shelf life	Keep tightly sealed, 12 months.

disclaimer

The information provided in this Technical Data Sheet (TDS) includes recommendations for the use of the product and recommendations for its application, which are based on product knowledge and experience as of the date of this TDS. The product can be used in a variety of different applications, as well as in different working environments and processes that are beyond our control, as well as different applications and operating conditions beyond our control. Therefore, we do not accept any responsibility for the suitability of the product for your production process and conditions and for its intended use. We recommend that you conduct pre-production testing according to your own operating methods and process conditions to ensure the suitability of our products. We are not responsible for the information in this Technical Data Sheet (TDS) or any other written or oral advice regarding the relevant product.

Key words:

UV adhesive | Conductive silver adhesive